Molding Heroes

Just finished adding new T-molding to my Avengers Infinity Quest LE. Looks great! So I thought I document the process for others. Interesting to note that the T-Molding I received was 0.015 oversized AND some of the head dimension of the Stern machines have changed over the past few years – so understand that (at least with my AIQ) the 3/4″ molding from T-Molding.com installed in your new AIQ will be about 1 MM proud (sticks out) on both the inside and outside edges. Still looks great though!

After posting this, I saw another Pinsider mention using 11/16″ T-molding instead of the 3/4″ size. You most certainly can order that size and it’s exactly 1/16″ narrower than 3/4″ and will likely fit with less or no overhang.

This write up will be done in mostly images with captions. Total install time including clean-up was just at 45 mins. Buy materials at T-Molding.com. You will need to buy 20 feet because that is their minimum. It takes 6 feet per side to do a modern Stern head (12 feet total game) – so you will end up with some extra (8 feet or so). Save that extra piece for the next game (it’s enough to do one side)